A major infrastructure project in the European Alps has successfully employed SupAnchor's self drilling anchor system to stabilize a steep, unstable slope along a critical transport corridor. The site, characterized by fractured limestone, high groundwater pressure, and limited access for heavy equipment, required a geotechnical reinforcement system that could combine drilling, grouting, and anchoring in a single pass. SupAnchor's self drilling anchor bolts provided the necessary speed and reliability, enabling crews to install over 3,000 anchors despite challenging winter conditions.
The project demanded anchors capable of withstanding tensile loads exceeding 600 kN in variable rock conditions. SupAnchor supplied its standard hollow bar anchors in 32 mm and 38 mm diameters, with lengths ranging from 6 to 15 meters. Each anchor features a lost drill bit with a central flushing hole, allowing simultaneous drilling and grouting—a critical advantage in water-bearing strata. The anchors were hot-dip galvanized for corrosion protection, with an additional epoxy coating in the most aggressive groundwater zones.
| Parameter | Value |
| Bar Diameter | 32 mm / 38 mm |
| Ultimate Tensile Strength | ≥ 680 kN |
| Yield Strength | ≥ 550 kN |
| Corrosion Protection | Hot-dip galvanized + optional epoxy |
| Drilling Method | Rotary percussive with air/water flush |
On site, the drill-and-grout bolt process proved efficient: crews advanced the hollow bar anchor through overburden and rock using a track-mounted drill rig, with cement grout pumped through the bar during drilling. This method eliminated the need for separate casing and reduced installation time by approximately 40% compared to conventional multi-stage anchors. The ground stabilization anchor system was designed for a service life of 120 years, meeting the stringent requirements of European rail standards.
This project exemplifies the growing demand for self drilling anchor systems in infrastructure renewal across mountainous regions. With climate change increasing the frequency of extreme rainfall and slope instability, engineers are turning to robust geotechnical reinforcement systems that can be installed quickly and reliably. SupAnchor's hollow bar anchors have also been specified for tunnel portal stabilization, retaining walls, and bridge abutments worldwide. The company's SDA bolt factory direct supply model ensures consistent quality and rapid delivery, a critical factor for time-sensitive projects.
The use of micropile hollow bar anchors in this application demonstrates the technology's versatility: it performs equally well in soft ground, karstic rock, and mixed face conditions. As urbanization spreads into hillside areas, the self drilling anchor for retaining walls is becoming a standard solution for landslide mitigation and earth retention.
SupAnchor, a leading soil nail system manufacturer and ground anchor bolt factory, brings over two decades of experience in geotechnical anchoring. The company holds ISO 9001 and ISO 14001 certifications, and all production is traceable from raw material to final assembly. Their rock bolt for underground mining and civil engineering applications has been deployed in more than 50 countries, from high-speed rail projects in Asia to hydroelectric dams in South America.
“This project highlights our ability to deliver engineered solutions for the most demanding environments,” said the project manager at SupAnchor. “We work closely with contractors and designers to optimize every anchor bolt system for geotechnical engineering challenges.”
The company's philosophy—Professional, Innovative, Collaborative—is embedded in every product, from the smallest hollow bar anchor to complete system designs. With ongoing research into higher-strength steels and advanced corrosion coatings, SupAnchor continues to set benchmarks in ground stabilization anchor system performance.
A major highway project in the Alps uses SupAnchor's self drilling anchor system to address complex geology, ensuring long-term slope stability and safety.
SupAnchor's patented GFRP friction bolt offers corrosion resistance, safety, and lightweight design for underground engineering and slope stabilization.
A challenging alpine slope stabilization project uses SupAnchor self drilling anchor system to address loose rock and high groundwater. 3,000+ hollow bar anchors installed for long-term geotechnical safety.
SupAnchor’s Grade 75 self-drilling hollow anchor bars provide high-strength, cost-effective geotechnical reinforcement for challenging slope conditions.
SupAnchor's self-drilling anchor system secures a steep slope for a railway expansion in the Alps, overcoming fractured rock and tight deadlines.
