At a large-scale hydropower station slope stabilization project in rugged mountainous terrain, engineers faced persistent challenges from fractured rock, high groundwater pressure, and the need for rapid, reliable anchoring. SupAnchor, a recognized manufacturer of self drilling anchor systems, supplied its Grade 75 self-drilling hollow anchor bars to address these conditions. The bars were installed as a geotechnical reinforcement system to secure the slope and prevent rockfall, enabling safe construction and long-term stability. The project involved hundreds of anchors installed across variable ground conditions, requiring a solution that could be drilled and grouted in a single pass while maintaining high load capacity.
The slope, rising over 60 meters with an inclination up to 70 degrees, required a dense pattern of anchors to resist both shallow and deep-seated failure surfaces. SupAnchor's engineering team worked closely with the contractor to select the appropriate bar length and spacing, utilizing the Grade 75's compatibility with existing R and T thread accessories to streamline procurement and installation.
The Grade 75 self-drilling hollow anchor bar acts as both a drill rod and a tension member. During installation, contractors use a drill-and-grout bolt technique: the hollow bar is rotated into the ground, and grout is pumped through the central bore simultaneously, filling the annular space and bonding the bar to the surrounding soil or rock. This eliminates the need for separate drilling, casing extraction, and rebar insertion, reducing cycle times by up to 30% compared to conventional solid bar systems. The continuous T-thread design provides a higher rib area than traditional threaded bars, which significantly improves bond performance in concrete and grout. All specifications and sizes are consistent with SupAnchor's R and T thread self drilling anchor products, ensuring easy interchangeability and integration into existing systems.
| Property | Value | Standard/Note |
|---|---|---|
| Elongation | ≥ 6% | ASTM A615 |
| Yield Load | Approx. 147 kN (33 kips) | - |
| Ultimate Load | Approx. 196 kN (44 kips) | - |
| Weight | Approx. 2.6 kg/m (1.75 lbs/ft) | - |
| Thread Orientation | Left-hand | Compatible with SupAnchor couplers |
The combination of high yield and ultimate loads (147 kN and 196 kN respectively) gives the Grade 75 bar ample capacity to stabilize large rock wedges and withstand dynamic forces from water pressure and seismic activity. The elongation of at least 6% allows the bar to undergo plastic deformation before failure, providing ductility that is critical in slopes where minor ground movement is expected. At approximately 2.6 kg/m, the bar is light enough for manual handling in difficult access areas, yet robust enough to serve as a permanent anchor. The left-hand thread orientation prevents unintentional loosening during installation and is fully compatible with SupAnchor's standard couplers, plates, and nuts, reducing the need for custom components.
During installation, crews reported that the hollow bar anchor's self-drilling capability allowed them to penetrate through zones of weathered gneiss and fractured quartzite without changing drilling tools. Grout injection pressures of 0.5 to 1.5 MPa ensured complete filling of the borehole and achieved a strong mechanical interlock between the bar's continuous T-thread and the surrounding rock mass. Pull-out tests conducted on site confirmed that the installed anchors met or exceeded design loads, providing confidence in the system's long-term performance.
Beyond hydropower slopes, the Grade 75 hollow bar anchor is suitable for tunneling, mining, and deep foundation reinforcement. Its self drilling anchor bolt design is particularly effective in collapsing ground or water-bearing strata where conventional drilling would require temporary casing. The system can be used as a soil nail system manufacturer offering both temporary and permanent support, and its compatibility with SupAnchor's existing R and T thread accessories allows seamless integration into ongoing projects. Typical applications include:
In tunneling applications, the Grade 75 bar can be used for face stabilization and spiling, where its hollow section allows for grout injection behind the face. The same bar can be cut to length on site and coupled with standard accessories, reducing inventory requirements. For mining operations, the bar's high elongation provides energy absorption in dynamic rockburst conditions, enhancing worker safety. The adaptability of the Grade 75 system also extends to corrosion protection. Although the base product is uncoated, it can be supplied with epoxy coating or hot-dip galvanizing upon request, making it suitable for permanent installations in aggressive groundwater environments. This flexibility further solidifies its position as a versatile geotechnical reinforcement system.
Global investments in renewable energy and water infrastructure have intensified demand for reliable geotechnical reinforcement systems. The ability to install anchors quickly in difficult ground translates into lower overall project costs and shorter schedules. By replacing solid threaded bars with the Grade 75 hollow bar anchor, contractors can achieve comparable or better load-transfer performance while reducing steel consumption and installation time, a critical advantage in remote hydropower sites. The drill-and-grout method also minimizes disturbance to the surrounding ground, reducing the risk of slope destabilization during installation—a key safety factor on active construction sites. As infrastructure owners prioritize long-term durability and reduced maintenance, self drilling anchor systems that combine drilling, grouting, and reinforcing in one step are becoming the preferred choice. Moreover, the reduction in construction time and material handling lowers the carbon footprint of the anchoring process, aligning with sustainability goals in large infrastructure projects. The use of a single self drilling anchor bolt that replaces multiple components also streamlines logistics in remote areas where transportation is limited.
SupAnchor has built a reputation as a professional and innovative manufacturer of self drilling anchor systems and related ground support products. The company's ISO-certified production facilities and continuous R&D efforts ensure that every self drilling anchor bolt meets international standards. From large-scale hydropower projects to urban tunneling, SupAnchor's collaborative engineering approach helps clients overcome complex geotechnical challenges with customized solutions. The Grade 75 series exemplifies this commitment by offering a product that is not only robust but also highly adaptable to different thread systems and site conditions. With a global distribution network and a track record of successful projects, SupAnchor continues to lead the market in hollow bar anchor technology. SupAnchor's commitment to quality is reflected in its adherence to ISO 9001 and CE certification requirements, as well as its participation in international geotechnical standards committees. The company's collaborative approach extends to on-site training and technical documentation, ensuring that contractors can fully exploit the advantages of the self drilling anchor system.
For the hydropower station slope stabilization project, SupAnchor provided not only the Grade 75 self-drilling hollow anchor bars but also technical support, couplers, plates, and nuts, ensuring a complete and reliable anchoring package. The successful deployment underscores the company's dedication to delivering high-performance, cost-effective, and adaptable geotechnical reinforcement systems to the global market.

SupAnchor's Grade 75 self-drilling hollow anchor bars deliver ASTM A615-compliant performance for hydropower slope stabilization, combining high bond strength, system compatibility, and rapid installation.
A major European infrastructure project overcame difficult ground conditions using SupAnchor self drilling anchor bolts, highlighting the value of advanced geotechnical reinforcement systems in modern tunneling and slope stabilization.
SupAnchor's self drilling anchor system integrates drilling, grouting, and anchoring in one, delivering high tensile strength and corrosion resistance for demanding geotechnical projects.
SupAnchor's self drilling anchor system demonstrated exceptional performance in stabilizing a challenging slope, offering efficient installation, high load capacity, and corrosion protection for critical infrastructure safety.
SupAnchor launches a patented GFRP friction bolt offering corrosion resistance, spark-free installation, and lightweight strength for underground and slope stabilization projects.